| Welcome to... THE OLD PINE BOX Handcrafted Solid Wood Coffins At Reasonable Prices |
Step 1: Assemble sides and ends into two ‘L’s by matching the markings on the bottom
edges. Apply a small bead of glue at each joint. Wipe away any excess with a damp
cloth.
| Assembly instructions for the "Chariot" by THE OLD PINE BOX |
Step 5: Slide the lid onto the coffin and
your pet’s “Chariot” is complete.
Helpful Hint:
You will find it easier to assemble the parts
of your kit if you partially insert the screws
beforehand and let the tip of the screw
protrude approximately 1/4" as shown.
The screw tips can then be used to assist in
lining up the parts, one to the other.
You will find it easier to assemble the parts
of your kit if you partially insert the screws
beforehand and let the tip of the screw
protrude approximately 1/4" as shown.
The screw tips can then be used to assist in
lining up the parts, one to the other.
Step 2: Finish assembly of the sides by
joining together the two ‘L’s.
Step 3: Next, attach the bottom
piece. Starting with screws in
opposing corners will help to square
and align the sides.
Step 4: With the bottom attached, turn the
coffin upright and screw the handles in place.
If desired, tap the provided wooden plugs into
each screw hole and sand flush.
